Genie TZ-50 Manuel d'utilisateur Page 6

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 41
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 5
4 Genie TZ-50 Part No. 114164
Operator's Manual Second Edition • First Printing
Be aware of the boom position when rotating the
turntable.
Operators must comply with employer, job site and
governmental rules regarding use of personal
protective equipment.
Do not operate a boom in the path of any crane
unless the controls of the crane have been locked
out and/or precautions have been taken to prevent
any potential collision.
No stunt driving or horseplay while operating the
machine.
Do not attempt to manually move a machine
unless it is on a firm, level surface. Use the
parking brake to control the speed of the machine
when pushing a machine that is not attached to a
tow vehicle.
Explosion and Fire Hazards
Models with engines: Do not start the engine if you
smell or detect liquid petroleum gas (LPG),
gasoline, diesel fuel or other explosive
substances.
Models with engines: Do not refuel the machine
with the engine running.
Refuel the machine and charge the battery only in
an open, well-ventilated area away from sparks,
flames and lighted tobacco.
Do not operate the machine in hazardous
locations or locations where potentially flammable
or explosive gases or particles may be present.
Component Damage Hazards
Do not use the machine as a ground for welding.
SAFETY RULES
Fall Hazards
Occupants must wear a
safety belt or harness and
comply with applicable
governmental regulations.
Attach the lanyard to the
anchor provided in the
platform.
Do not sit, stand or climb on the platform guard
rails. Maintain a firm footing on the platform floor
at all times.
Do not climb down from the platform when raised.
Keep the platform floor clear of debris.
Lower the platform entry mid-rail or close the entry
gate before operating.
Collision Hazards
The machine must be on a level surface or
secured before releasing the parking brake.
Check the work area for overhead obstructions or
other possible hazards.
Be aware of crushing hazards when grasping the
platform guard rail.
Do not lower the boom unless the area below is
clear of personnel and obstructions.
Vue de la page 5
1 2 3 4 5 6 7 8 9 10 11 ... 40 41

Commentaires sur ces manuels

Pas de commentaire