Genie S-85 Manuel d'utilisateur télécharger pdf (Page 27)

Part No. 43650 Genie S-80 & Genie S-85 25

Operator's ManualSecond Edition · Fifth Printing

Operation from Platform

1 Turn the key switch to platform control.

2 Pull out both ground and platform red

Emergency Stop buttons to the

ON position.

3 Gasoline/LPG models: Choose fuel by moving

fuel select switch to desired position.

4 Start engine. Do not press down the foot switch

when starting engine.

To Position Platform

1 Extend the axles.

2 Move the lift/drive select switch to the lift

position (if equipped).

3 Press down the foot switch.

4 Slowly move the appropriate function control

handle or toggle switch according to the

markings on the control panel.

Machines equipped with Platform Level Control

Disable Function: The platform level toggle switch

will not operate when the boom is raised or

extended past the drive speed limit switches.

To Steer

1 Move the lift/drive select switch to the drive

position (if equipped).

2 Press down the foot switch.

3 Turn the steering wheels with the thumb rocker

switch located on top of the drive control

handle.

Use the color-coded direction arrows on the

platform controls and the drive chassis to identify

the direction wheels will turn.

To Drive

1 Move the lift/drive select switch to the drive

position (if equipped).

2 Press down the foot switch.

3 Increase speed: Slowly move the drive control

handle off center.

Decrease speed: Slowly move the drive control

handle toward center.

Stop: Return the drive control handle to center

or release the foot switch.

Use the color-coded direction arrows on the

platform controls and the drive chassis to identify

the direction machine will travel.

Machine travel speed is restricted when the boom

is raised or extended.

Drive Enable

Light ON indicates that the boom has moved just

past either non-steering wheel and drive function

has been interrupted.

To drive, hold the drive enable switch to either

side and slowly move the drive control handle off

center.

Be aware that the machine may move in the

opposite direction that the drive and steer controls

are moved.

Always use the color-coded direction arrows on

the platform controls and the drive chassis to

identify the direction machine will travel.

OPERATING INSTRUCTIONS

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33

Commentaires sur ces manuels

Pas de commentaire

Genie S-85 Manuel d'utilisateur Page 27

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Genie S-85