Genie AWP 114002 Manuel d'utilisateur télécharger pdf (Page 29)

Operator’s ManualThird Edition • Fourth Printing

Part No. 114002 Genie AWP Super Series 27

Returning the Machine to

Standing Position

1 Be sure the area below the machine base and

T-handle is clear of personnel and obstructions.

2 Slide out the T-handle

untl the lock pin snaps

into place.

3 Carefully pull down the

T-handle until the

machine rests at mid-

tilt position.

4 Lower the machine with

the T-handle until the base casters are in

contact with the ground. Use the appropriate

number of people and proper lifting techniques.

5 Return the sliding T-handle to the stowed

position.

TILTBACK OPERATION INSTRUCTIONS

Stowing the Tilt-back Assembly

1 Remove the retaining pin.

2 Firmly grasp the

tilt-back frame and

remove the

tilt-back strut from

the strut socket.

3 Lift the tilt-back

frame, hold in an

upright position

against the spring

and secure with

the retaining pin.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Commentaires sur ces manuels

Pas de commentaire