Genie Z-22N Manuel d'utilisateur télécharger pdf (Page 27)

Part No. 43654 Genie Z-34/22 & Genie Z-34/22N 25

Operator's Manual

Second Edition • Ninth Printing

Drive Enable

Light on indicates that the boom has moved past

either non-steer wheel and the drive function has

been interrupted.

To drive, hold the drive enable switch up or down

and slowly move the drive control handle off

center.

Be aware that the machine may move in the

opposite direction that the drive and steer controls

are moved.

Always use the color-coded direction arrows on

the platform controls and the drive chassis to

identify the direction the machine will travel.

Low Battery Indicator Light

Flashing light indicates battery power is low and

the batteries need to be charged. There is

adequate power left to lower the boom and move

the machine to a location where the batteries can

be charged.

Light on indicates the batteries are fully discharged.

Stop using the boom and charge the batteries

immediately.

Note: Machines equipped with Low Voltage

Interrupt Option will lose primary and secondary

boom lift functions when batteries are fully

discharged.

After Each Use

1 Select a safe parking location—firm level

surface, clear of obstruction and traffic.

2 Lower the boom to the stowed position.

3 Rotate the turntable so that the boom is

between the non-steer wheels.

4 Turn the key switch to the off position and

remove the key to secure from unauthorized

use.

5 Chock the wheels.

6 Charge the batteries.

OPERATING INSTRUCTIONS

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Pas de commentaire

Genie Z-22N Manuel d'utilisateur Page 27